Feature: eCAP support
Goal: Improve Squid3 content adaptation performance by 20+%, remove the need for an ICAP server
Status: Ready for testing; code in Squid 3.1 and later
Disclaimer: The Squid Project does not distribute, support, or endorse these eCAP adapters. Please contact adapter developers with any adapter-specific feedback.
Install libecap and build Squid with the --enable-ecap configure option. Install an adapter module. The library and sample adapters are available from the eCAP site.
Enable eCAP support, configure Squid to load an adapter module, and specify which services the module provides:
ecap_enable on loadable_modules /usr/local/lib/ecap_adapter_minimal.so ecap_service eReqmod reqmod_precache 0 ecap://e-cap.org/ecap/services/sample/minimal ecap_service eRespmod respmod_precache 0 ecap://e-cap.org/ecap/services/sample/minimal
Among all dynamically loaded services, only the services matching ecap_service configuration are enabled by Squid. However, enabling an adaptation service is not enough. You need to direct messages to the service(s) using adaptation_access directives:
adaptation_service_set reqFilter eReqmod adaptation_service_set respFilter eRespmod adaptation_access respFilter allow all adaptation_access reqFilter allow all
ICAP and eCAP services can co-exist. ACLs control which service gets to process the HTTP message.
Optional eCAP features
Squid supports sending client IP address to the adapter via the libecap::metaClientIp transaction option. Please see eCAP FAQ for details and do not forget to enable adaptation_send_client_ip in squid.conf.
Supported eCAP versions
Squid-3.1 supports libecap v0.0.3 only, but will try to build with any libecap version installed. Builds with incompatible versions should fail, but be careful: Check that you are building with libecap v0.0.3 and not the latest library version. The same applies to Squid-3.2 releases prior to v220.127.116.11.
Squid-3.2 releases starting with v18.104.22.168 support libecap v0.2.0 and have a configure-time libecap version check.
Eventually, Squid may also check (at runtime) that the loaded adapter was built with a compatible libecap version, but that check will not be possible until libecap API supports it.
Note: These are not legally binding opinions. If you have any doubts regarding the licensing please contact your lawyer.
Squid is licensed under the GPLv2+, which brings up the question of licensing for distributed Squid plugins. There are several, conflicting views regarding eCAP adapter licensing requirements, including:
- eCAP is not a Squid-specific API. Compliant eCAP adapters should work in any eCAP-compliant host application. They are not "Squid plugins" just like libc is not a Squid plugin. Thus, eCAP adapter distribution is not subject to Squid licensing restrictions.
Communication with eCAP adapters is limited to invoking the "main" functions of the adapter and waiting for them to return. FSF considers this a borderline case: http://www.gnu.org/licenses/gpl-faq.html#GPLAndPlugins
eCAP modules fall well inside the boundary of code loaded and run internally. As such any modules require a GPLv2+ compatible license in order to distribute: http://www.fsf.org/licensing/licenses/gpl-faq.html#GPLAndPlugins